JGAURORA Plastic 3D Printer ABS Filament 1.75mm 1kg 2.2lbs Spool High Accuracy For 3d Printers 9 Colors Available
UNIT | ABS | |
Density: | kg/m⊃3; | 1.01 |
Melt Point: | ℃ | 220-260 |
Melt Flow Index: | g/10min | 1.43 |
Tensile strength: | Mpa | 40.96 |
Elongation at Break: | >td ###20.86 | |
Bending Strength: | Mpa | 45.44 |
Bending Modulus: | Mpa | 1948.45 |
Notch Impact Strength: | KJ/㎡ | 22.11 |
Weight: | kg/roll | 1 |
Diameter: | mm | 1.75 |
Quality control:
1. All of our 3D printer filaments are 100% virgin material,never use recycled material or regrind material,and all had achieved the latest REACH certificate.
2.Before the mass production,our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer.
3.The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75mm,and our engineer will adjust it immediately when it alarms to indicate of wrong size,and this unqualified filament will be cut off and never use it.
4.To keep the filaments dry,each roll of filament is packed in a vacuumed polybag with a desiccant inside of it.
Package
Dimensions: 210 x 210 x 70mm
Inner Diameter: 56mm
No posts found